Technician Exam T6: Electronic and Electrical Components Questions and Answers

At a glance

  • Questions in this section of the pool: 46
  • Questions from this section on your exam: 4 of 35, one from each group
  • Free on this page: group T6A, 11 questions with answers
  • Pool in use: 2026 to 2030 (exams given July 1, 2026 through June 30, 2030)

Subelement T6 of the Technician exam covers the parts that make up a radio: resistors, capacitors, inductors, diodes, transistors, and how to read a schematic. The questions below are from the official question pool, and the questions on your exam will be worded exactly as they are here. The order of the four choices can change, so learn the answer itself and not its letter.

What this section covers

  • T6A: Fixed and variable resistors; Capacitors; Inductors; Fuses; Switches; Batteries (11 questions, free below)
  • T6B: Semiconductors: basic principles and applications of solid-state devices, diodes and transistors; Gain (12 questions, full binder)
  • T6C: Circuit diagrams: use of term schematic, basic structure; Schematic symbols of basic components (12 questions, full binder)
  • T6D: Component functions: rectifiers, relays, voltage regulators, meters, indicators, integrated circuits, transformers; Resonant circuit; Shielding (11 questions, full binder)

Free sample: group T6A

Fixed and variable resistors; Capacitors; Inductors; Fuses; Switches; Batteries. One question on your exam comes from this group. The correct answer is highlighted.

T6A01

What electrical component opposes the flow of current in a DC circuit?

  1. Inductor
  2. Resistor
  3. Inverter
  4. Transformer

Correct answer: B. Resistor

Why: A resistor opposes the flow of current.

T6A02

What type of component is often used as an adjustable volume control?

  1. Fixed resistor
  2. Power resistor
  3. Potentiometer
  4. Transformer

Correct answer: C. Potentiometer

Why: A potentiometer is a resistor you can adjust by turning a shaft or moving a slider. Volume controls are a common use.

T6A03

What electrical parameter is controlled by a potentiometer?

  1. Inductance
  2. Resistance
  3. Capacitance
  4. Field strength

Correct answer: B. Resistance

Why: A potentiometer varies resistance.

T6A04

What electrical component stores energy in an electric field?

  1. Resistor
  2. Capacitor
  3. Inductor
  4. Diode

Correct answer: B. Capacitor

Why: A capacitor stores energy in an electric field.

T6A05

What type of electrical component consists of conductive surfaces separated by an insulator?

  1. Resistor
  2. Potentiometer
  3. Oscillator
  4. Capacitor

Correct answer: D. Capacitor

Why: A capacitor is two conductive surfaces with an insulator between them.

T6A06

What type of electrical component stores energy in a magnetic field?

  1. Resistor
  2. Capacitor
  3. Inductor
  4. Diode

Correct answer: C. Inductor

Why: An inductor stores energy in a magnetic field.

T6A07

What electrical component is typically constructed as a coil of wire?

  1. Transistor
  2. Capacitor
  3. Diode
  4. Inductor

Correct answer: D. Inductor

Why: An inductor is usually a coil of wire.

T6A08

What is the function of an SPDT switch?

  1. A single circuit is opened or closed
  2. Two circuits are opened or closed
  3. A single circuit is switched between one of two other circuits
  4. Two circuits are each switched between one of two other circuits

Correct answer: C. A single circuit is switched between one of two other circuits

Why: SPDT means single-pole, double-throw. It connects one circuit to either of two others.

T6A09

What type of switch is represented by component 3 in figure T-2?

  1. Single-pole single-throw
  2. Single-pole double-throw
  3. Double-pole single-throw
  4. Double-pole double-throw

Correct answer: A. Single-pole single-throw

Why: The simplest switch symbol, one line that opens or closes one connection, is a single-pole single-throw switch. It turns one circuit on or off.

T6A10

Which of the following battery chemistries is rechargeable?

  1. Nickel-metal hydride
  2. Lithium-ion
  3. Lead-acid
  4. All these choices are correct

Correct answer: D. All these choices are correct

Why: Nickel-metal hydride, lithium-ion and lead-acid batteries can all be recharged.

T6A11

Which of the following battery chemistries is not rechargeable?

  1. Nickel-cadmium
  2. Carbon-zinc
  3. Lead-acid
  4. Lithium-ion

Correct answer: B. Carbon-zinc

Why: Carbon-zinc batteries are single-use. The other three types can be recharged.

The other 3 groups in this section

These 35 questions are worth 3 of the 4 points this section carries on your exam.

T6B

Semiconductors: basic principles and applications of solid-state devices, diodes and transistors; Gain

12 questions, in the full binder

T6C

Circuit diagrams: use of term schematic, basic structure; Schematic symbols of basic components

12 questions, in the full binder

T6D

Component functions: rectifiers, relays, voltage regulators, meters, indicators, integrated circuits, transformers; Resonant circuit; Shielding

11 questions, in the full binder

The full Technician binder

Get the other 35 questions in T6, with explanations

  • All 409 official questions, every group in every section
  • A plain-English explanation under each answer
  • Unlimited full-length 35-question practice tests
  • A printable binder you can study from offline

Get the full binder

Keep going

See the Technician exam study guide for how the exam is scored, or try the free 10-question sample test.

Source: NCVEC Question Pool Committee, 2026 to 2030 Technician Class (Element 2) question pool, public release of February 19, 2026. Test Day Binder is not affiliated with the FCC, the NCVEC, or any volunteer examiner group.

Last checked: November 2026.

Leave a Comment